REMO RACING are the exclusive Australian importers for the world famous KOSMIC KART
The KOSMIC KART is backed up  by one of the most experienced Karter' s in Australia today. Remo Luciani winner of 7 Australian Championships and 57 State Championship Titles, has over 30 years experience and still racing competitively today.
 
Remo is the driving force behind Remo Racing and as a result of his experience and the results that he delivers, more and more people come to him to sharpen their karts for the big races.

2012 KARTX ADVERT KOSMIC









































 

 




new 2013 kosmic kart bannerotk_logo_118x100

pdfCLICK HERE to view brochure of new components

The new 2013 chassis represent the best project carried out by the Kosmic Racing Kart research and development department recently and are provided with the most refined components.


MERCURY MY13  and  LYNX MY13
These are the names of the 2013 kosmic Racing Kart top-of-the-range chassis for 2013.

FEATURES
New Adjustable Pedals
New Floor Plate
New Fuel Tank
New Brake Systems OTK SA2 & SA3 With One-Piece Brake pump
New High Grip Steering Wheel Covering

 

TS28/13  and  TS30/13
These are the new names for the 2013 TS28 and TS30 models
Compared to the previous model, the 2013 chassis will have the following

FEATURES
New Low Steering Column Suppor
New Fuel Tank
4 Spokes Steering Wheel 2012 model

KOSMIC PART_OF_THE_PUZZLE






















REMO RACING_IS_THE_MISSING_PUZZLE_PIECE











2012 HOMOLOGATION

KOSMIC MERCURY MY11 AND LYNX MY11 CHASSIS IN 2012
Kosmic is glad to announce that Mercury MY11 chassis is still going to be considered as its production’s peak model for next 2012 season, too.
High competitiveness gained by the Mercury MY11 as well as the many results obtained give us confidence in this winning chassis model, which
will be employed in the most important International competitions. Mercury MY11 chassis was introduced on last season (2010) and soon
confirmed its best performances: speed, reliability and versatility.

The technical appraisal that Mercury MY11 is constantly receiving stimulates us in working with more and more enthusiasm, with the aim of taking our team partners and drivers up at the highest level.
Traditionally, OTK invests in the research and development and all his technical staff is studying and planning more and more developed and performing technical components.
Next to the Mercury MY11 once more we will find the Lynx MY11.

An extensive Kosmic Kart set-up guide has been distributed to our Kosmic Kart Dealers.
Please ask your Kosmic dealer for your copy. 

Remo Racing is not an online store.
Please contact your nearest Kosmic Kart distributor or contact us for a dealer nearest you.
otk_logo_118x100

OTK M4 BODYWORK by OTK Kart Group

 
OTK is a trademark which identifies the kart components produced by OTK Kart Group. In fact a complete line of original parts, developed and tested on the race track, are guaranteed by their high quality and experience.  The OTK line, characterised by its unmistakable attention to detail and suitable for any type and kar
t trademark, OTK provides a wide range, from the axle group to the brake system, from b odyworks to magnesium accessories, leading on to super light and resistant carbon fiber parts.

The M4 bodywork set is undoubtedly one of the most interesting features within the accessories section homologated for the next three-year period.  The new bodywork is the result of long hours spent testing in the wind tunnel where it has been further optimized to get a better aerodynamic package, and to allow the engine, radiator and brake system to benefit by the air flow in the best way during racing.

Some items of the bodywork that have been renewed - the side pods are now thinner, the front spoiler is equipped with important appendages and a new rear protection bumper has been introduced which has been reduced in weight and dimension.
 
 
 
 

2012  KOSMIC KART RANGE

2012 top range chassis from OTK Kart Group features new Tank, new Axle Supports and new Steering Wheel. Click the following links to view the Chassis specifications.

back to top


CHASSIS EQUIPMENT VERSIONS
  • RACING HST stub-axles, MXP wheels in magnesium, magnesium OTK components, new bearing carrier, OTK seat with flat bottom. OTK M4 WTD bodyworks (Wind Tunnel Design) complete with stickers. Rear plastic protection, adjustable footrest in machined aluminium, new fuel tank 8,5 lt and a four spokes oval shaped steering wheel covered with a high adherence tissue.
  • PLUS BST stub-axles, MXP wheels in magnesium, magnesium OTK components, OTK seat with flat bottom. OTK M4 WTD bodyworks (Wind Tunnel Design) complete with stickers. Rear chromium-plated bumper and steering wheel covered with alkantara.
  • BASIC BST stub-axles, AXP wheels in aluminium, aluminium OTK components, OTK seat with flat bottom. OTK homologated bodyworks complete with stickers. Rear chromium-plated bumper and steering wheel covered with alkantara.

KOSMIC-NASSA



back to top



Kosmic Mercury MY11 (2011 - 2012)

The MERCURY MY11 is composed by a frame realized with Ø 30 mm tubes in molybdenum chrome steel, adjustable in height both front and rear. It is supplied with two torsion bars which allow to modify the rigidity of the chassis. The adjustment of camber and caster is easily changeable thanks to the incorporated uniball eccentric washers. The chassis is supplied with new one-piece bearing carrier supports and new steering column supports. The chassis has OTK M4 bodyworks, studied and tested in order to reduce the coefficient of aerodynamic resistance and it is equipped with stickers.

Racing is the version chosen for this model, at top of the range, and it is provided with magnesium OTK components. The brake system can be chosen among the BS5 - BS6 - BS7 according to the category in which is used.
  
Category: KF 1-2  Version: RACING  Brake: BS7  Axle: Ø 50x2
Category: KF 1-2  Version: RACING  Brake: BS6  Axle: Ø 50x2
Category: KF 3     Version: RACING  Brake: BS6  Axle: Ø 50x2 (category KF3 on order only)
Category: KF 1-2  Version: RACING  Brake: BS5  Axle: Ø 50x2

 Homologation: CIK/FIA 49/CH/14

 mercury_bare_frame
























back to top


 

Kosmic Lynx MY11 (2011 / 2012)

LYNX MY11 is composed by a frame realized with Ø 32 mm tubes in molybdenum chrome steel, adjustable in height both front and rear. It is supplied with two torsion bars which allow to modify the rigidity of the chassis. The adjustment of camber and caster is easily changeable thanks to the incorporated uniball eccentric washers. The chassis is supplied with new one-piece bearing carrier supports and new steering column supports.

Racing is the version chosen for this model, at top of the range, and it is provided with magnesium OTK components. The brake system can be chosen among the BS5 - BS6 - BS7 according to the category in which is used. The chassis has OTK M4 bodyworks, studied and tested in order to reduce the coefficient of aerodynamic resistance and it is equipped with stickers.

Category: KF 1-2  Version: RACING  Brake: BS7  Axle: Ø 50x2
Category: KF 1-2  Version: RACING  Brake: BS6  Axle: Ø 50x2
Category: KF 3     Version: RACING  Brake: BS6  Axle: Ø 50x2 (Category KF3 on order only)
Category: KF 1-2  Version: RACING  Brake: BS5  Axle: Ø 50x2

 

 Homologation CIK/FIA 50/CH/14

lynx_bare_frame

 

 

 

 

 

 

 

 

 

 

 




 

back to top

___________________________________________________________________

*OPTIONAL:
Ø 206 x 16 mm brake disk (homologation 44-45-46/FR/11 :1/:1/VO) with disk’s protection

 


 


back to top

Kosmic TS30 (2011 / 2012)

TS30 is composed by a frame realized with Ø 30 mm tubes in molybdenum chrome steel and it has been created for hard or extra-hard mixture tyres. It is adjustable in height both front and rear. Basic is the version chosen for this model with aluminium OTK components, and Plus, with magnesium OTK components. It is supplied without footrest and equipped with OTK BS2 brake system and OTK M4 bodyworks complete with stickers.

Version: PLUS  Brake: BS2  Axle: Ø 50x2
Version: PLUS  Brake: BS2  Axle: Ø 40x3 

TS30_bare_frame


back to top




Kosmic TS28 (availability: on order only) (2011 / 2012)

TS28 is composed by a frame realized with Ø 28 mm tubes in molybdenum chrome steel and it has been created for hard or extra-hard mixture tyres. It is adjustable in height both front and rear.  Basic is the version chosen for this chassis, with aluminium OTK components, and Plus, with magnesium OTK components. It is supplied without footrest and equipped with OTK BS2 brake system and OTK M4 bodyworks complete with stickers.

Version: PLUS  Brake: BS2  Axle: Ø 50x2
Version: PLUS  Brake: BS2  Axle: Ø 40x3

TS28_bare_frame


back to top


 

Kosmic Nordix (2011 / 2012)

NORDIX is composed by a frame realized with Ø 28 mm tubes in molybdenum chrome steel with 1010 mm wheelbase, suitable for drivers from 12 to 14 years old. It is available in the Basic version with OTK components in machined aluminium. It is provided with eccentric washers which allow the adjustment of the camber and caster and with front bar which allows to modify the rigidity of the frame. It is supplied without footrest and equipped with OTK BS2 brake system, axle of Ø 30 mm and OTK M4 bodyworks complete with stickers.

Version: BASIC Brake: BS2  Axle: Ø 30x5

back to top


 

Kosmic Rocky EXP (2011 / 2012)

ROCKY EXP is composed by a frame realized with Ø 28 mm tubes in molybdenum chrome steel with 900 mm wheelbase. It is available in the Basic version with OTK components in machined aluminium. It is provided with eccentric washers which allow the adjustment of the camber and caster. It is equipped with OTK MBS brake system, chromium-plated rear bumper and homologated bodyworks complete with stickers. Optional the aluminium foot-rest.

Version: BASIC Brake: MBS  Axle: Ø 30x5

back to top



 

Kosmic Rookie (availability: on order only) (2011 / 2012)
 

ROOKIE is composed by a frame realized with Ø 28 mm tubes in molybdenum chrome steel, homologated ACI/CSAI, with 950mm wheelbase. It is available in the Basic version with OTK components in machined aluminium. It is provided with eccentric washers which allow the adjustment of the camber and caster. It is equipped with OTK BSM brake system, rear plastic protection and homologated OTK M5 bodyworks complete with stickers. The aluminium foot-rest or the chromium-plated rudder pedals can be bought as an option; this allows to adjust the pedals to suit the position of drivers.

 Version: BASIC Brake: BSM  Axle: Ø 30x5

back to top




Kosmic Micro (availability: on order only) 

MICRO is composed by a frame realized with Ø 25 mm tubes in molybdenum chrome steel, with 800 mm wheelbase. It is available in theBasic version with OTK components in machined aluminium. It is equipped with mechanical brake system, bodyworks complete with stickers and rear chromium-plated bumper

Version: BASIC Brake: MECH Axle: Ø 25 P

2011_Kosmic_Rookie_Chassis


2011_micro_adjustable_seat


2011_Micro_Adjustable_Rudder_Pedle

 


micro_bare_frame

back to top