E-mail
Tuesday, 17 November 2009 07:52

Parilla X30 engine specifications


logo_Parilla_IAME_2010

The Parilla X30 engine comes complete and READY TO RACE for only $3,495.00

Click here for more information >> OFFICIAL X30 ENGINE PAGE <<


Engine's and spare parts are available from ALL reputable Kart Shops in Australia. If they do not have parts or engines in stock get them to give us a call direct! Remo Racing Pty Ltd (03) 5382-0241 or contact us for a dealer nearest you.

* Selettra electronic ignition with pick-up in the stator and generator for battery charging whilst engine is in use.
* H.T. coil and vibration dampers
* NGK BR9EG sparkplug and PVL cap
* Centrifugal clutch group with Z11 detachable sprocket
* TRYTON HB27 carb. Ø 27 mm
* Exhaust Header X30
* Exhaust Flex with silicon sheath
* Springs for Exhaust Flex
* Exhaust silencer Model X30
* Electric starting motor incorporated
* Starting motor transmission group
* Starting motor support
* Additional starting motor support
* Green CDI unit Rev-limited 15,800 rpm
* Wiring Harness Assembly
* Electronic Relay
* Starter key assembly with 2 keys
* 12 V - 7.2 A/h battery
* Battery support
* Battery support clamps
* Velcro strap
* Rubber pads for battery
* Support engine plate

Included auxiliary equipment:

* Radiator
* Radiator mounting kit
* Water pump group and pulley with 30mm / 50mm clamps *
(these dimensions may change acording to the type of chassis on which the engine is installed)
* Complete wáter hose kit
* Complete thermostat 50°
* KG Socorem silencer (square type)


WHAT MAKES THE X30 STAND OUT FROM OTHER 125 ENGINES?


The X30 engine is eligible for State and National competition and approved for use in the following classes

Leopard Light
Leopard Heavy
TAG 125
Restricted 125
Open Performance
and
Junior Performance
...Did you know that it costs 'ZERO DOLLARS' to move from Junior Performance class to Seniors. Just remove the restrictor plate! No Hidden Costs.


click here >> HOMOLOGATION DOCUMENT - X30 << A MUST read for all X30 engine owners

The X30 Homologation document also INCLUDES the following drawings:

1) DRAWINGS: the piston, cylinder, cylinder head, cylinder base, crankshaft, crankcase, carburettor, inlet silencer, exhaust silencer, clutch, radiator, wiring diagram (selettra digital K ignition), electronic box AKA20L, wiring diagram (PVL Digital ignition) Balancing shaft.

2) TRYTON CARBURETTOR: Technical Specs & parts descriptions 

3) The Following parts MUST carry the IAME MARKINGS on them.
If the following parts do not carry the IAME markings on them then your engine is illegal under AKA rules.
Piston
Conrod
Balancing Shaft
Crankshaft
Gear command Balancing Shaft
Starter Ring
Engine Sprocket
Clutch Drum
Clutch Body
Starter
Reed Group and Petals
Carby inlet Conveyor
Carburettor
Exhaust Silencer
Exhaust Header
Radiator
Stator
Clutch Cover and H.T. Coil
Bendix Cover


MORE DOWNLOADS CAN BE FOUND ON THE OFFICIAL X30 PAGE  HERE >>> Parilla X30

 

Parilla_join_the_track_step_on_the_podium_X30_challenge

 
Last Updated on Friday, 15 April 2011 04:21